Description
This has happened to at least five people in the last two years. When drivers try to take a right turn from the park and ride lot and are not familiar with the place or turn too quickly they fall into this trap because of the low curb height. The curb height supposed to be 6in minimum but due to poor design and construction this is only 4.5in.
I hope that City of Am Can correct this deficient design and construction appropriate curb as soon as possible. The hole in the median also needs to be filled as the wheel stops on the parking lot can be missed by vehicles and the vehicles can get stuck. Thanks
also asked...
A. Public Safety is the biggest concern. Sub standard design by the City is very concerning as well.
9 Comments
Acknowledged Becky Hendryx, Public Works Administration (Verified Official)
Closed Becky Hendryx, Public Works Administration (Verified Official)
Reopened AmCanFixer (Registered User)
Closed Becky Hendryx, Public Works Administration (Verified Official)
For a better Vallejo (Registered User)
Reopened AmCanFixer (Registered User)
Secondly, if City's intention was to use the median as a drainage for the parking lot, a little brainstorming could have resulted in a better design with a curb all around and drainage cut outs on the curb which could have achieved both objectives. Is City going to address any of these concerns?
Jen Kansanback, Communications Manager (Verified Official)
AmCanFixer (Registered User)
Closed Yvonne Brown, Public Works Administration (Verified Official)